Produse pentru saci de sac (62)

BORSA SCORTA VIP

Realizzate a mano con pellame di bovino con trama impressa tramite tatuaggio. Ispirata alla cultura orientale, i dettagli e le finiture in ottone antico rendono unico il contrasto naturale tra oriente e occidente. Ideata dal designer Alberto Olivero, la collezione ha un design che ricerca l'equilibrio tra contrasti, unito ad una artigianalità italiana attenta alle mode, ma non soggetta alle tendenze.

TABLETOP VACUUM PACKAGING MACHINE DZ 400 2T WITH TWO SEALING BARS Tabletop vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420x70/130(H) Vacuum pump:20 m³/h Working cycle:about 30 sec

Manufacture in italy of pets accessories for pets, dogs, cats

Nocciole tostate (origine: ITALIA - Piemonte) varietà Tonda Gentile Trilobata, sacchetto da 1 kg. Nocciole con grado di tostatura medio, confezionate sottovuoto entro 24 ore dalla loro torrefazione. Le nocciole dopo la loro sgusciatura vengono calibrate e cernite a mano, quindi tostate e private della loro pellicola esterna (perisperma), attraverso un processo meccanico che tuttavia non l'asporta completamente (residuo 5% circa). Le nocciole tostate Baldaiassa vengono torrefatte quotidianamente con un grado di tostatura medio, che conferisce al frutto l'inconfondibile aroma equilibrato ed intenso. Per conservarlo e mantenerlo inalterato nel tempo vengono confezionate sottovuoto entro 24 ore dalla lavorazione. Shelf life 12 mesi.

Borse donna e uomo, pochette.

Tabletop manual bag sealers with manual closing and electromagnetic block. Impulse heat sealing (the resistance heats for a few seconds) with timer for adjusting the sealing time and a timer for adjusting the cooling time. The sealing cycle is indicated by an indicator light. Sealing bar length: mm. 300 - 400 and sealing width of 5 mm, maximum thickness weldable 0.20 mm(mm. 0.40 total). Suitable for sealing plastic polyethylene bags of medium thickness, polypropylene, light coupled polyethylene + aluminum / paper. Example model:ME 305 HIM Max. seal length:mm. 300 Seal width:mm. 5 Sealable materials:PE-PP Electrical supply:220V

Vertical sealing machines for hanging garments, suitable for packaging ironed garments such as jackets, shirts and suits. They can seal all types of bags between 400 and 700 mm in width and of any thickness. The machines carry out an impulse welding (the resistances heat up only during the welding). Welding times vary from a minimum of 0.6 sec. to a maximum of 1.2 sec. The sealing machines for hanging garments are available in the following versions: FPMM MANUAL MODEL The FPMM manual model only performs the upper sealing of the bags containing the garments. The bars are closed by manual command from the operator who acts on a lever located on the control panel. The bottom of the envelope remains open. FPMA/FPMA PLUS PNEUMATIC MODEL The FPMA model is more professional and robust and has a minicomputer that manages the functionality of the machine, from the safety devices to the working times. Thanks to it, it is possible to work in three different operating mode. Seal length:mm. 600 Max. length of garments:mm. 1650 Material to use:Polyethylen film, also with gussets

Electric sewing machine Mod. FPMP 82 (220 V and 12 V ) for bags particularly robust, vibration-free, usable in agricultural industries, chemical, food, packaging, textiles, for use in finishing. Suitable for sealing bags of a different type of paper, jute, fabric and plasticized, etc. such as bags of food or chemicals. The FPMP 82 can be used for the sewing of the collection nets of olives or antihail. The operation with reciprocating motion with "wear" arrangement allows a very efficient grip even on medium to high thicknesses. The machine works with standard 220 volt electric cable. It's also available in 12V that can be equipped with external battery and backpack. For uses other than those listed please send us a test sample of your product. Sewing speed:up to 18/20 m/min Sewing power:Thickness up to 10/12 mm Point length:Variable from 4 to 10 mm Point type:Chain Cutter:Automatic

This special automatic table top/vertical with stand constant heat sealer. Are suitable for sealing polypropylene and paired / laminated bags, paper, barrier materials, etc. The sealing jaws of the type "hot bar" are equipped with resistance and thermoregulator for controlling the temperature from 30 ° C to 200 ° C. The closing of the jaws is through an electromagnet which ensures a high sealing pressure and allows the sealing of thick bags with or without side gussets. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag. The vertical model with pedestal can be tilted to 90 degrees, has a special support surface to support the bag during sealing. In this way the operator has both hands free to hold the bag since the sealing is made by pressing the pedal. seal length:mm. 300/400/600 Seal width :mm. 14 Temperature:30°÷200°C

Sealing machine with stand and mechanical footswitch, constant heat sealing bars fot the closure of polypropylene bags and coupled in aluminum, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The closing of the sealing bars by a mechanical pedal guarantees a high welding pressure and allows the sealing of high thickness envelopes with or without lateral bellows. Seal length:mm. 300/400 Seal width :mm. 14 Temperature:30°C.÷200° C. Sealable material:PP-AL/PE

FPXBAG-NEW is an innovative semiautomatic vertical packaging machine which combines different existing technologies with unique innovations. FPXBAG-NEW is an easy to use, economical and functional form-fill-seal machine which creates 3 hermetic sealing bags starting from a plain foil roll. Compared to the other vertical machines, FPXBAG-NEW has an innovative system of forming box which allows to get a fast format change. This systems reduces the machine shot-down and we gain in productivity. Moreover the two clamps of the horizontal sealing allow to keep the forming bag in position reducing the any break possibility. The key factor of the FPXBAG-NEW is the versatility of the machine which can seal any kind of film, this thanks to the incomparable sealing system. The machine is supplied with 1 forming tube type 200 (suitable for making bags with a width of 185 mm). On request it is possible to have forming tubes with different sizes, type 200 and type 250. Hourly production:0­-1000 pz. Bags width:mm 170/185/235 (depending on collar) Bag lenght :from mm 50 to mm. 330/580 with tape Film reel width:mm 360/410/520 Max diameter film reel:mm 250 Film thickness:from 15 to 50 µm Usable film:Polyethylene, polyolefins, drilled, coupled, macro-perforated, biodegradable films, cartene Horizontal sealing:mpulse with double strip and cutting line

ME-CFE CONSTANT AUTO SEALERS WITH MOTOR CONTROL Table top motorized sealer with electric pedal and welding bars at a constant temperature for sealing polypropylene bags and paired/laminated aluminium, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and thermostat for controlling the temperature from 30 ° C to 250 ° C. The closure of the bars it takes place through an engine which guarantees a high welding pressure (0,7 Kg./cm2) and allows the sealing of envelopes with hight tickness with or without side bellows. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag. Seal length:mm. 300/400 Seal width :mm. 14 Temperature:80°÷250°C

Impulse sealer with mechanical pedal and floor support for the closure of bags in plastic material heat-sealable, impulse sealing (resistance to heat for a few seconds) and timer for adjustment. At the end of the sealing is possible to trim the bag with the cutter installed on the bar. The open structure also allows you to install a coil on the back of the machine and to obtain envelopes of the desired length using the tubular film. The sealing head can be tilted up to 45 ° to allow the closure of the envelopes containing liquids or powders. Maximum thickness of 0.15 mm sealable . (0.30 mm. Overall) Max. seal length:mm. 450/mm. 600 Seal width:mm.2 Thermosealing materials:PE-PP

MG 1020 SEALING MACHINE WITH CLOSING MAGNET Pulse sealers MG 1020 series, with 1020 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 1020: bench sealing machine with manual closing of the bars MGMI 1020: bench sealing machine with motorized closing of the bars and electric pedal Max. seal length:mm. 1020 Seal width:mm. 5 Max. seal thickness:0,20 mm (0.40 tot)

MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal Max. seal length:mm. 300 Seal width:mm. 3 Max. seal thickness:0,15 mm (0,30 tot)

Semiautomatic bench heat sealers with timer and trimming for bags in PE PP and l - Semiautomatic impulse heat sealers for the bench, for closing PE, PP, PVC and light coupled bags. Equipped with timer, pedal and trimmer. They can be used for: food products, in the automotive, cosmetics, electronics, mechanical and plastic parts, packaging for e-commerce, pellets and agriculture and for chemical products. Available in 460mm and 610mm welding lengths, and 4mm high. Suitable for bags of different thickness, with moist or dusty contents. Double sealing bar with separate regulation of temperatures and times. Manual and semi-automatic operation with electromagnetic closure. Adjustment of the welding power by means of a 6-position switch. Activation by electric pedal or automatic cycle button with digital control of the welding parameters. Digital timer with LCD, for precise control of welding (0-10 sec.) And cooling (0-20 sec.) Times. Can be combined with dosing systems.

The new FP GK-350 BB battery-operated sewing machine is light and easy to handle and is the best solution when you have to sew bags and nets in locations where it is not possible to use 220 volt current or where you want to have greater freedom of movement. The robust drive mechanism allows you to easily sew bags in jute, paper, fabric, plastic, net bags and anti-hail net and for olive harvesting. In principle, it is suitable for closing bags of any material thanks to the automatic dragging. For special processes, we recommend sending us a sample of the product so that we can test the machine in real conditions of use. The maximum sewing pass thickness is 10 mm and the thread tension can be easily adjusted using a knob. It is recommended to sew material with low density so as not to break the needles. The battery is 36V at 2.6 Ah and recharges in about 5-6 hours, the battery charger is supplied and works with a voltage of 220V at 50Hz. Sewing speed:10 m/min. Maximum thickness of the material:Up to 10 mm (low density materials) Transport:Reciprocating Stitch length:Fix mm 8 Point:Chain Cutter:Automatic Battery:36V - 2,6Ah

Borsoni di qualsiasi foggia e misura, il nostro punto di forza è nella scelta dei materiali e nella cura dei particolari. Studiate per custodire o trasportare qualsiasi oggetto, attrezzo o materiale; tra le nostre produzioni abbiamo soluzioni “fashion” rigorosamente Made in Italy che completano l’offerta di valigeria, come custodie PC o Portabiti. Ma anche soluzioni pratiche come ad esempio borse per il trasporto di strumenti musicali o borse porta ruota e frangivento, realizzate in materiale molto resistente, complete di comode maniglie per il trasporto, borse per attrezzi per qualsiasi tipo di set di attrezzi, da quelli pesanti agli strumenti di precisione, … Materiale, formato, protezione, scomparti, tipi di chiusure, tasche esterne e interne sono completamente personalizzabili alle esigenze del cliente.

Impulse sealers MG 621 series, with 620 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. The MG 621 series sealing machines are available with mechanical or motorized closing bars with 3 or 5 mm sealing thickness depending on the model. Also available in stainless steel with mechanical closure of the bars and and 3 mm sealing. Model:MG 621 Max. seal length:mm. 620 Seal width:mm. 3-5 Power:750W Dimensions:cm. 76x20x27 Weight:Kg. 21

Semiautomatic table top sealer with electric pedal and impulse sealing bar (resistance is heated for a few seconds), suitable for closing bags of plastic material heat-sealable. The closing of the sealing bars by pressing the pedal electric with solenoid allows the operator to have both hands free and for increased production, just select the automatic cycle with timed closure. The timers for adjusting the welding and cooling ensure maximum reliability of each type of material. Simple to use, requires no preheating. Maximum thickness. weldable 0.20 mm. (0.40 mm. Overall) Example model:ME 355 AI Sealing bar lenght:mm. 350 Sealing width:mm. 5 Weldable materials:PE-PP Max thickness weldable:0,20 mm (tot 0,40 mm)

Continuous band sealer suitable for closing horizontal bags with a maximum height mm. 400 and max weight. 5 kg. By using PTFE seal belts, polyethylene, polypropylene, cellophane, paper, aluminum, and other laminates can be sealed. The temperature is controlled by an electronic controller and the speed is adjustable. The distance between the solder and the edge of the bag is 20 mm. The distance (width) between the welding headand the conveyor belt is adjustable and is also adjusted the height of the conveyor belt to the plane of welding. The machine is equipped with a marker rotary heat and interchangeable characters (20 charactersmax height 5 mm.), The system works with inked rollers for easy reading and comes complete withphotocell to make a mark at the desired point. Max products weight:5 Kg Seal width :mm. 10 Seal temperature:0° - 250° Sealable materials:PP –PE-Coupled

MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm. Model:MOD. MG 421 Max. seal length:mm. 420 Seal width:mm. 3-5 Electrical supply:220V Power:600W Dimensions:cm. 56x20x27 Weight:Kg.Kg. 15

PNEUMATIC SEALER SM 40 P - PLASTIC BAND Pneumatic sealer Mod. MINI SM 40 P, robust and safe, built entirely in painted steel suitable for closing polythene bags with clipband (plastic with double metal core). Also available with engraved date or ink date. All parts in contact are made of AISI 304 stainless steel suitable for contact with food. Power supply machine:Pneumatic Air consumption:50 liters/minute Working pressure:6 bar Maximum speed of closing:30 pz./min Size flat clipband:Width 8 mm Thickness 0,6 - 0,8 mm Length 500 - 600 mt

The sealer mod. DZ 800 W is a multifunctional machine for of large dimensions. Without limitation caused by the size of vacuum chamber, this horizontal vacuum packaging machine has very wide application range. Built in stainless steel. The vacuum pump 20 m³/h allows for high production. The sealing bar (or the sealing bars depending on the model chosen) with width 10 mm and closing with compressed air ensures a perfect seal on any type of material also very thick. The intake system with nozzles allows the use of any type of smooth or embossed envelope (NO BELLOW). The closure of the bars is through a dual button command (dual control security). When you have to pack flours or products that could make some dust, it is absolutely recommended to install the dust filter to avoid damaging the vacuum pump (main part of the machine) Similarly, we recommend installing the filter for liquids when you need to vacuum-pack products such as sauces or tomato purée. seal length:mm 800 Seal width:mm10 Max. film thickness:mm 0,20 Vacuum pump:20 m³/h Air compressed supply:6 bar Weldable materials:PE-PP-AL/PE

Machine suitable for the closing of bags with height, mm. to 150 mm. 270 and max weight. 3 kg. The welding system with belts PTFE allows for closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is adjustable from 0-250° C. and the feed speed is adjustable from 0 -12 mt. / min.The welding head is adjustable in height and the distance between the welding and the edge of the bag is 10 mm. The machine is equipped with rotary solid ink marker and interchangeable characters (up to 20 characters with a height of 5 mm.), The system works with inked rollers for easy management and is complete with a photocell to do the marking in the desired location. This model is constructed in the standard version, that is, the advancement of the product occurs from right to left. Sealing width:mm. 10 Temperature set:0° - 250° Sealable materials:PP –PE – COUPLED Max product weight:Kg. 3

VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction. seal length:mm 600 or 800 Seal width:mm 10 Weldable materials:PE-PP-AL/PE Max. film thickness:mm 0.20 (0.8 total with bellows) Height of Package:mm from 300 to 900

MANUAL LEVER SEALER WITH CONSTANT TEMPERATURE Thermosealing machine that works with sealing bars at a constant temperature for the closure of polypropylene bags and coupled/aluminum laminate, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and controller for controlling the temperature from 30 °C to 200 °C. The closing of the bars is through a quick manual lever that guarantees a high sealing pressure and allows the sealing of envelopes high thickness with or without side gusset. Attention: it is necessary to preheat for about 5 minutes. The sealer is available in two models: ME 300 CFH BZ with checkered knurled bars ME 300 CFH BL with longitudinally knurled bars Seal length:mm. 300 Seal width:mm. 15 Welding temperature:30°-200°C Thermosealing materials:PE-PP-AL/PE

The PANDYNO FPPD vertical inserters allow to an operator to fill and seal the packs avoiding the use of preformed bags. The operator must in fact insert the product to be packaged in the magazine tube, on which a few meters of tubular film have been previously loaded. The product goes down into the tubular film up to the support surface. The operator manually closes the sealing bar by applying a slight pressure on the bar. The welding machine in a single operation carries out the welding of the package, the cutting of the film and the welding of the bottom of the next envelope. This operation takes place using an electromagnetic blocking device. By equipping the bagging machine with several loaders, it is possible to increase the productivity of the machine. To avoid waiting times it is also possible to pre-load different magazine tubes so that they can be quickly replaced once the film is finished. The standard model can be placed on a bench and comes with a charger of your choice. Sealing bars length:mm 400 Welding width:mm 2 x 2,5 Polyethylene thickness:Max. 60 µm Chargers dimensions (on choice):cm 8-10-12-15-20 (film width) Welding type:Impulse Bars closure:Manual with magnet

Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing. Sealing width:mm. 5-10 Temperature:constant - maximum 200 °C Max sealing thickness:300 my (2x0,15 mm)